Pump CAM 200 / 300


Pump CAM 200/300

Pump CAM 200 / 300
  • Construction: self-priming pump
  • Pump body: cast iron
  • Impeller: brass
  • Mechanical seal: ceramic-graphite-NBR
  • Max. liquid temperature: 0 - 50°C
  • Max. operating pressure: 8 bar
  • Max. suction height: 8 - 9 m
Technical dataCAM 200CAMt 200CAMt 300
Voltage:230 Volt400 Volt400 Volt
Motor:1,5 kW1,5 kW2,2 kW
Max. delivery:7,2 m³/h7,2 m³/h7,2 m³/h
Max. head:58,1 m58,1 m64,8 m
Connections:
(suction- and pressure side)
1 1/2" female and 1 1/4" female
Dimensions in mm:ca. 506 x 203 x 232 mm
Weight:ca. 25,5 kgca. 25,5 kgca. 26,5 kg


Domestic water supply system with pump CAM 200 / 300

Domestic water supply system with pump CAM 200 / 300

fully assembled, including membrane tank, pressure switch for pressure-dependent switching on and off, pressure gauge and flexible hose, wired ready to plug in

 

 

available in 230 V and 400 V:

Group CAM 200/100 l horizontal membrane tank - colored
Dimensions: (L x W x H) ca. 840 x 450 x 780 mm
Group CAM 200/200 l horizontal membrane tank - colored
Dimensions: (L x W x H) ca. 1.110 x 560 x 880 mm
Group CAM 300/100 l horizontal membrane tank - colored
Dimensions: (L x W x H) ca. 840 x 450 x 760 mm
Group CAM 300/200 l horizontal membrane tank - colored
Dimensions: (L x W x H) ca. 1.110 x 560 x 880 mm

Pump CAMt 200
with integrated frequency inverter Epic

Pump CAMt 200 with integrated frequency Epic

The integrated frequency inverter Epic for electronic speed control and constant pressure:

  • Pressure-dependent on/off, as well as automatic adjustment of pump performance to varying operating conditions
  • Energy saving by speed control
  • Dry running protection, soft start & stop
  • Overload protection
  • Display of operating status through LED's
  • Including pressure sensor Danfoss SPD 1/4“, cable with plug 1,5 m
  • Conform to EN- 61000-2-3

Input: 230 Volt single-phase
Output: 230/400 Volt three-phase
Suitable for pumps up to 7,5 A

Note: Frequency controlled pumps should be installed with a diaphragm tank to avoid constant switching on and off (max. tank size = 10% of max. capacity).


Domestic water supply system with pump CAMt 200
and integrated frequency Inverter Epic

Group CAMt 200/8 l with a diaphragm tank and integrated frequency inverter Epic

  • Available tanks: colored or stainless steel
  • Input: 230 Volt
  • Output: 400 Volt
Domestic water supply system with pump CAMt 200 and integrated frequency Inverter Epic
Version: colored
Domestic water supply system with pump CAMt 200 and integrated frequency Inverter Epic
Version: stainless steel