Deutsch
français
magyarPressure booster system
Pressure booster system consisting of: pumps Ultra SV with IPFC
Function:
- Speed control and pressure constant
- Pressure-dependent switching on and off
- Protection against overvoltage, undervoltage, phase failure
- Dry running protection, soft start & stop
- Digital indication of the pressure on the display
Technical data:
- Design type: normal-priming
- Casing / Diffusors: stainless steel AISI 304
- Impeller: stainless steel AISI 304
- Flange / Pump head: cast iron
- Mechanical seal: Graphite-Ceramic-NBR
- Max. liquid temperature: -5 - + 90°C
- Max. operating pressure: 8 bar
- Also available with stainless steel distributor
Note:
At frequency controlled pumps, a diaphragm tank should be installed to avoid constant switching on and off. (max. container size = 10% of max. capacity)
2 Ultra 7 SV/300-6T / 2 IPFC 306
Power consumption:
- 2 x 400 V 50 Hz
- 2 x 2,44 A
- 2 x 2,2 kW
| Delivery Q (m³/h - l/min.) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0 | 4,8 | 7,2 | 9,6 | 12,0 | 14,4 | 16,8 | 19,2 | 21,6 |
| 0 | 80 | 120 | 160 | 200 | 240 | 280 | 320 | 360 |
| Head H (m.) | ||||||||
| 71,8 | 70,0 | 68,9 | 65,7 | 61,3 | 55,4 | 48,1 | 38,5 | 26,0 |
| Dimensions | |||||
|---|---|---|---|---|---|
| C | D | H1 | H2 | DNA | DNM |
| 467 | 145 | 40 | 226 | 2 1/2" | 2" |
3 Ultra 7 SV/300-6T / 3 IPFC 306
Power consumption:
- 3 x 400 V 50 Hz
- 3 x 2,44 A
- 3 x 2,2 kW
| Delivery Q (m³/h - l/min.) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0 | 7,2 | 10,8 | 14,4 | 18,0 | 21,6 | 25,2 | 28,8 | 32,4 |
| 0 | 120 | 180 | 240 | 300 | 360 | 420 | 480 | 540 |
| Head H (m.) | ||||||||
| 71,8 | 70,0 | 68,9 | 65,7 | 61,3 | 55,4 | 48,1 | 38,5 | 26,0 |
| Dimensions | |||||
|---|---|---|---|---|---|
| C | D | H1 | H2 | DNA | DNM |
| 467 | 145 | 40 | 226 | 3" | 2 1/2" |
Pressure booster system consisting of: pumps CABt
Function:
The pumps of the booster set can be pressure-dependent on and off. By attaching several smaller pumps is constant adaptation to consumption. In case of failure the system automatically switches to the next pump. As water indicator float switch, liquid probes or guardian can be clamped in the scheme.
Technical data:
- Design type: Self-priming
- Pump body: Cast Iron
- 2 Impeller: Brass
- Mechanical seal: Graphite-Ceramic-NBR
- Max. liquid temperature: 0 - 50°C
- Max. operating pressure: 8 bar
| Type | Number of pumps | Engine output per pump | Connections | Dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Volt | kW | A | Suction | Pressure | A | B | C | D | E | F | ||
| 2 CABt 150 | 2 | 380 | 1,10 | 3,3 | 2" | 1 1/2" | 935 | 550 | 720 | 565 | 152 | 400 |
| 3 CABt 150 | 3 | 380 | 1,10 | 3,3 | 2" | 1 1/2" | 935 | 1080 | 720 | 565 | 192 | 400 |
| 2 CABt 200 | 2 | 380 | 1,50 | 3,9 | 2" | 1 1/2" | 935 | 550 | 720 | 565 | 152 | 400 |
| 3 CABt 200 | 3 | 380 | 1,50 | 3,9 | 2" | 1 1/2" | 935 | 1080 | 720 | 565 | 192 | 400 |
