Deutsch
français
magyarSubmersible drainage pumps with grinder
Submersible drainage sewage pump with grinder GRS/GRE
- Application: submersible drainage pump for domestic waste water up to 40°C, depth of immersion: max. 20 m
- Materials: motor and pump body made of cast iron
- Motor: dry motor, single-phase 230 Volt or three-phase 400 Volt - 50 Hz
- Mechanical seal: silicon carbide
- Cutting unit: consisting of disk with sharp edge holes and stainless steel knife, suitable for all destructible solids (not for fibrous materials!)
- Scope of delivery: 10 m cable
Types:
| GRS-100/2 M | 230 Volt - without float switch |
| GRS-100/2 IGS | 230 Volt - with float switch |
| GRE-200/2 T | 400 Volt - without float switch (thermal relay in the pump) |
| GRE-200/2 TIG | 400 Volt - with float switch (thermal relay in the pump) |
Technical data:
| Type | Volt | kW | A | Performance | Ø | kg | Flange bolt circle distance | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| m³/h | 0 | 3,6 | 7,2 | 10,8 | 14,4 | 18,0 | 21,6 | |||||||
| l/min | 0 | 60 | 120 | 180 | 240 | 300 | 360 | |||||||
| GRS 100/2 | 230 | 0,9 | 6,6 | H m | 20,3 | 18,5 | 16,5 | 14,0 | 7,1 | - | - | 1 1/2" | 21 | 90 mm |
| GRE 200/2 | 400 | 1,7 | 3,8 | H m | 26,8 | 24,8 | 22,6 | 19,9 | 16,3 | 11,9 | 6,0 | 2" | 26 | 90 mm |
Submersible drainage sewage pump with grinder GRG - explosion proof
- Application:
- Submersible drainage pump for domestic waste water up to 40°C, with ATEX-label
- certified according to EN 50.014/50.018, can be used where traditional pumps can not be used due to the flammability of the conveyed fluid or the surrounding environment.
- ATEX: 2014/34/EU, II2G, Ex db IIB T4 Gb, Ex h IIB T4 Gb
- Materials: motor and pump body made of cast iron
- Motor:
- dry motor, three-phase 400 Volt - 50 Hz
- Isolation class F, protection IP 68, max. 30 starts per hour
- depth of immersion: max. 20 m
- Double Mechanical seal: silicon Carbide in oil chamber
- Cutting unit:
- consisting of disk with sharp edge holes and stainless steel knife
- suitable for all destructible solids (not for fibrous materials!)
- Max. Density of water: 1 kg/dm³, PH 6-11
- Max. viscosity: 1 mm²/s
- Scope of delivery:
- 10 m cable S1R8-F
- standard edition without pump foot, installation with coupling device, without coupling device the pump foot is required
Types:
| GRG-200/2 T | 400 Volt - without float switch |
| GRG-200/2 IGS | 400 Volt - with float switch, with control box and motor protection relay (not EX-protected) |
Technical data:
| Type | kW | A | Performance | Ø | kg | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| m³/h | 0 | 5 | 10 | 15 | 20 | |||||
| GRG 200/2 EX | 1,50 | 3,3 | H m | 24,4 | 23,3 | 17,7 | 13,4 | 1 1/2" | 32 | 88 mm |
Submersible drainage sewage pump with grinder GR Blue PRO
- Application: Submersible drainage pump for domestic waste water up to 40°C, depth of immersion: max. 20 m
- Materials: motor and pump body made of cast iron
- Motor: dry motor, single-phase 230 Volt or three-phase 400 Volt - 50 Hz
- Mechanical seal: silicon carbide
- Cutting unit: consisting of disk with sharp edge holes and stainless steel knife, suitable for all destructible solids (not for fibrous materials!)
- Scope of delivery: 10 m cable
Types:
| GR Blue Pro-100/2 M | 230 Volt - without float switch |
| GR Blue PRO-100/2 IGS | 230 Volt - witht float switch |
| GR Blue PRO-200/2 T | 400 Volt - without float switch (thermal relay in the Pump) |
| GR Blue PRO-200/2 TIG | 400 Volt - with float switch and control box (thermal relay in the pump) |
Technical data:
| Type | Volt | kW | A | Performance | Ø | kg | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| m³/h | 0 | 3,6 | 7,2 | 10,8 | 14,4 | 18,0 | ||||||
| l/min | 0 | 60 | 120 | 180 | 240 | 300 | ||||||
| GR Blue Pro 100/2 | 230 | 0,74 | 5,5 | H m | 18,0 | 16,4 | 14,4 | 11,5 | 6,9 | - | 1 1/2" | 19 |
| GR Blue Pro 200/2 | 400 | 1,5 | 4,3 | H m | 27,0 | 25,6 | 23,6 | 20,7 | 16,1 | 9,3 | 1 1/2" | 25 |
Submersible drainage sewage pump with grinder DSK
- Application: submersible drainage pump for domestic waste water up to 40°C
- Materials: cover and pump body made of cast iron, coat made of stainless steel
- Motor: single-phase 230 Volt or three-phase 400 Volt - 50 Hz
- Impeller: cutter impeller (not for fibrous hard parts, such as straw or hair!)
- Scope of delivery: 10 m cable
Types:
| DSK-05-1 M | 230 Volt - without float switch |
| DSK-05A-1 IGS | 230 Volt - with float switch |
| DSK-20-3 T | 400 Volt - without float switch |
| DSK-20-3 TIG | 400 Volt - with float switch and CEE plug, switch and motor protection relay |
Technical data:
| Type | kW | A | Performance | kg | Con- nection | Hose nipple mm | ca. Dimensions mm | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ø | Height | ||||||||||||
| DSK-05-1 | 0,4 | 4 | H m | 8 | 6 | 4 | 2 | - | 17,5 | 2" female | 50 | 250 | 410 |
| l/min | 0 | 150 | 200 | 240 | - | ||||||||
| DSK-20-3 | 1,5 | 3,5 | H m | 15 | 13 | 10 | 8 | 5 | 31,5 | 3" female | 76 | 300 | 490 |
| l/min | 0 | 200 | 350 | 420 | 550 | ||||||||
Submersible sewage pump with grinder PK-X-40
Application areas:
The pump is particularly suitable for pumping slurry-like and fibrous fluids, faeces, sewage,
liquids with high viscosity.
Max. liquid temperature: 50 °C
Protection: IP 68
Design type:
Screw pump with grinder. The cutting system is located directly after the impeller. The submersible pump
is mounted on a base, so that the pump can be placed directly on the bottom of the container. The pump must be suspended for security.
Sealing:
2-fold seal (carbon / ceramic), with an interposed seal chamber, shaft seal NBR
Materials:
- Pump body: cast iron GG-20
- Stem: stainless steel
- Grinder: Widea
Scope of delivery:
- Cable: 5 m with CEE-plug
- 1 each check valve and galvanized angle 1 1/4 "
- Switch with separate on-off switch,
float switch and motor protection relay
(surcharge with warning light horn 98 dB)
Versions:
| PK-X-40 | 400 Volt - with separate on-off switch, float switch, and motor protection relay |
Technical data:
| Type | Engine output | R.p.m. | Con- sumption | Voltage | Max. head | Max. delivery | Weight | Dim. mm | Con- nection |
|---|---|---|---|---|---|---|---|---|---|
| PK-X-40 | 1,5 kW | 1.430 | 3,75 A | 400 Volt | 50 m | 2,4 m³/h 40 ltr./min | 44 kg | 330 x 620 | 1 1/4" IG |
Accessories
Pump foot / Pump base
is required for installation without coupling device.
suitable for the following pumps:
- GRE 200/2
- GRG 200/2
- GRN 300/4
Swing check valve
Material: cast iron GJL-250
Ball: NBR
available in the following sizes:
- 1" - female
- 1 1/4" - female
- 1 1/2" - female
- 2" - female
- DN 65 - flange
- DN 80 - flange
Warning light with horn
Horn combined with warning light, separately controllable.
Also suitable for wet locations. Light bulbs are included.
Voltage: 230 Volt
Audio frequency: 600Hz/∼100 Hz, 98dB
Connection: Cable entry up to 9mm ∅
Coupling device
suitable for the following pumps:
- GRS
- GRE
- GRF
- GRG
- GR Blue Pro
- GRN