Drinking water circulation pump


UPH 15

Pump UPH 15

The water pump is used for circulation in one and two family houses. On the pressure side, a check valve must be installed, to protect the pump will be flows throug backwards, when you open the tap. On the suction side of a shut-off is installed for ease of maintenance. By the one-touch operation three different power curves can be chosen. The selected characteristic is indicated by the colored light in the button. Green indicates the lowest, yellow the average and red the highest level. By selecting the most appropriate curve, the pump is optimally adapted to the existing system.

Technical data:

  • Voltage: 230 Volt - 50 Hz
  • Protection: IP 42
  • Max. operating pressure: 10 bar
  • Ambient temperature: 0°C up to + 40°C
  • Liquid temperature: + 5°C up to + 65°C

Particularities:

  • 3 performance curves
  • Pump body made of cast Iron
  • Impeller made of techno polymer
  • Rotor shaft made of ceramic
  • Delivery without unions


Overview

Performance Dimensions Weight
kg
Con.
Motor
W
max.
height
max.
l/h
L
mm
B
mm
H
mm
Pump
DN
2,5-8 1 m 700 65 90 127 1 11/2"


Characteristic

characteristic