Buffer store series PS-M

 

The hot water storage of the series "PS-M" are particularly suited to the installation as a heat storage in heating systems. The tanks are only painted on the outside, while the inside of the tank is untreated.

Technical features:

  • Standard version, standing
  • Without coil, raw on the inside and the outside black lacquer
  • Complete with soft foam insulation 80/100 mm
Model PSM
300
PSM
500
PSM
800
PSM
1000
PSM
1500
PSM
2000
PSM
3000
PSM
5000
Size
liter
290 490 732 925 1.515 2.054 2.9605.055
Height with isolation
mm
1.357 1.630 1.760 2.090 2.200 2.420 2.700 2.950
Diameter without isolation
mm
550 650 790 790 1.000 1.100

1.250

1.600

Diameter with isolation
mm
650 750 990 990 1.200 1.300 1.450 1.800
Operating pressure
bar
3 3 3 3 3 3 3 3
Max. operating temperature 95°C 95°C 95°C 95°C 95°C 95°C 95°C 95°C
Dimension, tilted
mm
1.5051.794 1.740 2.090 2.215 2.450 2.705 3.010
Weight
kg
57 79 97 114 162 225 280 504

Instructions for installation:

Plastics are subject to temperature fluctuations. The insulation must therefore be stored for at least 24 hours at room temperature (not below 15 ° C) in order to avoid damage during installation! Place the insulation around the storage tank and fix it with tension belts if necessary. Tap from the back in the direction of the zipper until the rows of fasteners are so close that they can be easily closed. DO NOT USE TOOLS! If zippers are damaged during assembly, the entire insulation must be replaced at a cost.