Deutsch
français
magyarPump control with soft start
Pump control with soft start
Pump control with soft start mounted in a wall distribution, for switching a 400 V pump.
Thanks to the soft-start function, the pump gently moves up to the nominal speed. Advantages are reduced starting currents and lower mechanical loads. (No star-delta start is necessary!)
Protection via motor switch with thermal and magnetic tripping against overload.
Technical data:
- Steel control cabinet RAL 7035, IP 54
- Power supply: 400/230 volts
- Supply: from below
- Outlets: down
- Main switch in the side wall
- Motor protection switch
- Softstarter ABB Type PSR
- Emergency / off button in the switch cabinet door
- Illuminated pushbutton green: start / operation
- Illuminated pushbutton red: off / fault
| Motor up to: | Housing | Supply terminals | Output terminals |
|---|---|---|---|
| 3,0 kW | 300 x 300 x 210 mm | 5 x 4 mm² | 4 x 4 mm² |
| 4,0 kW | 300 x 300 x 210 mm | 5 x 4 mm² | 4 x 4 mm² |
| 5,5 kW | 300 x 300 x 210 mm | 5 x 4 mm² | 4 x 4 mm² |
| 7,5 kW | 300 x 300 x 210 mm | 5 x 6 mm² | 4 x 6 mm² |
| 11,0 kW | 300 x 300 x 210 mm | 5 x 6 mm² | 4 x 6 mm² |
| 15,0 kW | 300 x 300 x 210 mm | 5 x 10 mm² | 4 x 10 mm² |
| 18,5 kW | 400x 300 x 210 mm | 5 x 10 mm² | 4 x 10 mm² |
| 22,0 kW | 400 x 300 x 210 mm | 5 x 16 mm² | 4 x 16 mm² |
| 30,0 kW | 600 x 380 x 210 mm | 5 x 35 mm² | 4 x 35 mm² |
| 37,0 kW | 600 x 380 x 210 mm | 5 x 35 mm² | 4 x 35 mm² |